Hi all, we apologize in advance if any orders are late. We are unable to post any new orders from 20th March until the 31st March. They will have priority when we return.

Home BlueWren Cutting Dies - Made in Australia Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!
BlueWren Cutting Dies - Made in Australia

Strip Cutter - 2 1/2" and 6 1/2" Combo - 6743, Mat Included!

$93.75 AUD

Strip Cutter - 2 1/2" and 6 1/2" Combo 

Cuts either 6 1/2" strips, or 2 1/2" strips... up to 110" long using 8 layers,  or both together!

Uses a 10" x 15" mat, we include the mat !

Do you want a lid with that? 
Not included, but available separately CL1015

 

Cuts up a 110" length 

Cuts 6 layers of 100% cotton (recommended), although it can cut up to 8 layers occasionally. Especially with strip cutters as they have no stress on the blades.

To cut the size you require, place the fabric, fan-folded over the lines, avoiding going beyond the end of the blades.  Place the mat over the blades of the sizes you want to cut. There are markings etched on to the foam die top.  For example, if you want to cut a 6 1/2" strip as on the picture, fan-fold the fabric over the blades that are 6 1/2" apart.
If you wish only to cut a 2 1/2" strip, use those blades.  If you want to cut both at the same time...really saving a lot of time... fan-fold a long length of fabric approx 9 1/2"-10" wide, ensuring that all the fabric is flat and over the blades. Place the mat down and roll it through the cutter! 
The die needs a cutter that can use at least 10" wide dies. The gap is wider in most of them, so this will fit. 
At last, an Australian made cutting die that can fit in most brands of Fabric Cutters. Cuts 6 layers of 100% cotton (recommended), although it can cut 8 layers occasionally.  
In some cutters, such as Sizzix, an excellent shim can be achieved by using two of our mats underneath the die and one on top as it goes through the rollers, and then can be used to replace older mats as they wear.
Remember, you get one mat with each die! 
Made right here in Australia with state of the art machinery.  
All materials used are of the highest quality.Our own brand of cutting mat is made in Victoria, to our specifications and has been quality tested. They are interchangeable with other plastic cutting mats.We give a 1 year replacement warranty, and guarantee our workmanship.
Continue Shopping or View Cart

Customer Reviews

Based on 1 review Write a review

You may also like